Inquire/Review
OverviewFuyang Cheerfree Machine & Hardware Co., Ltd.
Contactor Ms. Candy Lee .
PortNINGBO SHANGHAI.
Minimum Order1 Set/Sets.
Supply Ability1000 Set/Sets per Month.
Payment TermsL/C,D/A,D/P,T/T,Western Union,MoneyGram,PAYPAL.
FOB Price

US $500 - 10,000 / Set

Specification

Material: Titanium Carbide

Brand Name: cheersonic

Type: Piezoelectric Ceramics

Place of Origin: Zhejiang China (Mainland)

Model Number: CSA20

You may also be interested in

More Detail

High quality 20kHz ultrasonic piezoelectric atomizer

Unlike conventional spray nozzles that rely on high velocity pressure to shear a fluid into small drops, the ultrasonic atomizer uses vibrational energy to generate a low velocity mist. Volumes can vary from microliters to liters, and atomizes continuously or intermittently.

From microliters to liters – continuous or intermittent

Dispenses material with virtually no overspray

Pressureless atomization – low velocity mist

Low cost atomizing probe replacement

Minimal atmospheric contamination

Virtually uncloggable

TYPICAL APPLICATIONS

Coating non-woven fabric, paper, etc.

Laboratory spray drying

Injecting moisture into a gas stream

Applying minute amount of oil, fragrance or flavor onto a product

Injecting small volume of reagents into a reactor

GENERAL DESCRIPTION

Unlike conventional atomizing nozzles that rely on pressure and high-velocity motion to shear a fluid into small drops, the ultrasonic atomizer uses only ultrasonic vibrational energy to generate a gentle, low-velocity spray. Overspray is practically eliminated, resulting in substantial material savings and reduction in airborn pollution. The liquid can be dispensed to the atomizing probe (nozzle) by either gravity or a small low-pressure metering pump, and atomized continuously or intermittently. The rate at which the liquid is atomized depends, within limits, solely on the volume that is being delivered onto the atomizing surface, and the frequency.

Typically, the higher the frequency, the lower the processing capability. The amount of material atomized can be as little as 2 μl/sec. Because the droplets typically drift downward at low velocity under the influence of gravity, the probe should be mounted with the tip facing downward, and air turbulence kept to a minimum to mitigate spray pattern distortion. A wide variety of coatings, chemicals, lubricants, and particulate suspensions can readily be atomized.

However, factors such as viscosity, miscibility, and solid content deserve consideration. For optimum atomization, the viscosity should be under 100 cps and the solid concentration kept below 30%. Although lower frequencies are capable of atomizing higher viscosity liquids, because the atomization process depends on setting a liquid film into motion, typically the higher the viscosity – the lower the flow rate, and the more difficult the application. The atomization of liquids containing long-chained polymer molecules is problematic, even in diluted form, due to the highly cohesive nature of the material

In many cases, mixtures with particulates can be atomized, because the solids are simply carried along in the drops. The low transport velocity of the liquid through the probe permits even abrasive slurries to be processed with negligible erosion of the passageway. Compared with conventional pressurized nozzles, the feed channel running through the probe and exit orifice are relatively large, and practically uncloggable. Drop size is primarily a function of frequency, and the higher the frequency, the smaller the drop diameter. With water, the median drop size at 20 kHz is 90 microns, and 50 microns at 40 kHz.

HOW DOES IT WORK?
The ultrasonic power supply converts 50/60 Hz to high frequency electrical energy. This electrical energy is transmitted to the piezoelectric transducer within the converter, where it is changed to mechanical vibrations. The ultrasonic vibrations are intensified by the probe and focused at the tip where the atomization takes place. The liquid travels through the probe, and spreads out as a thin film on the atomizing surface. The oscillating tip disintegrates the liquid into micro-droplets, and
ejects them to form a gentle, low velocity spray.

SPECIFICATIONS

TYPE

CSA15

CSA20

CSA30

CSA40

CSA50

CSA55

Frequency (khz)

15

20

30

40

50

55

median drop size ( μm)

120

90

70

50

40

25

Power (W)

500

200

150

130

100

30

High quality 20kHz ultrasonic piezoelectric atomizer

High quality 20kHz ultrasonic piezoelectric atomizer

High quality 20kHz ultrasonic piezoelectric atomizer

High quality 20kHz ultrasonic piezoelectric atomizer

High quality 20kHz ultrasonic piezoelectric atomizer

High quality 20kHz ultrasonic piezoelectric atomizer

High quality 20kHz ultrasonic piezoelectric atomizer

High quality 20kHz ultrasonic piezoelectric atomizer

High quality 20kHz ultrasonic piezoelectric atomizer

Contact Detail

Telephone:
86-571-63372511
Fax:
86-571-63373831
Address:
Gaoqiao Industrial Development Zone,Fuyang,Hangzhou,China
Zip:
311400
Country/Region:
China (Mainland)
Province/State:
Zhejiang
City:
Hangzhou

Trade market

Main MarketsNorth America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe Northern Europe
Total Annual Sales VolumeUS$1 Million - US$2.5 Million
Export Percentage1% - 10%

Factory Infomationt

Factory Size (Sq.meters)Below 1,000 square meters
Factory LocationGaoqiao Industrial Zone, Fuyang, China
Number of Production Lines3
Number of R&D StaffLess than 5 People
Number of QC StaffLess than 5 People
Contract ManufacturingOEM Service Offered Design Service Offered Buyer Label Offered
  • High quality 20kHz ultrasonic piezoelectric atomizer

Relate Products of High quality 20kHz ultrasonic piezoelectric atomizer

High quality Piezoelectric Ceramic For Ultrasonic Equipments

High quality Piezoelectric Ceramic For Ultrasonic Equipments

High quality Piezoelectric Ceramic For Ultrasonic Equipments We are a professional Piezoelectric Ceramics manufacturer in China. Quzhou Kingsoon Precision Machinery Co., Ltd. is a high-tech company which is specialized in research, development and production of ceramics ...

  • 1,Type:Piezoelectric ceramic
  • 2,Use: For Ultrasonic Equipments
  • 3,Clear sound / High sound pressure
  • 4,MOQ;1000pieces

Other Products from Fuyang Cheerfree Machine & Hardware Co., Ltd.

28KHz 50W ultrasonic piezoelctric piezo ceramic cleaning transducers converters sensors oscillator for cleaner

28KHz 50W ultrasonic piezoelctric piezo ceramic cleaning transducers converters sensors oscillator for cleaner

Ultrasonic transducer is a component that utilize the piezoelectricity for actualize electroacoustic conversion. Our power transducer are used where powerful ultrasonic wave must be generated, such as in cleaning equipment and easy to instal. These transducers are mounted into a structure that can

  • Place of Origin: Zhejiang China (Mainland)
  • Brand Name: CHERSONIC
  • Model Number: CS2850
  • Condition: New
  • Port:ningbo shanghai
  • Fob Price:US $5 - 100 / Piece
  • Mini Order:1 Piece/Pieces
Ultrasonic Hand Plastic Welding Machine

Ultrasonic Hand Plastic Welding Machine

CHEERSONIC Ultrasonic Welding Machine Introduction Ultrasonic Hand Plastic Welding Machine transmitted ultrasonic energy through welding parts to welding area,local high temperature will happened due to high acoustic resistance between two welding interface places. Also, no enough time spreading

  • Place of Origin: Zhejiang China (Mainland)
  • Brand Name: Cheersonic
  • Model Number: CS-WS-5
  • Voltage: 110V/220V
  • Power: 1000W
  • Frequency: 30K
  • Welding Area: spot
  • Dimensions: 35*40*10cm
  • Weight: 3KG
  • Usage: spot welding
  • Horn material: Titanium, Aluminum
  • Port:NINGBO/SHANGHAI
  • Fob Price:US $100 - 1,000 / Set
  • Mini Order:1 Set/Sets
High quality ultrasonic 20khz Heat Sinks spot welding machine

High quality ultrasonic 20khz Heat Sinks spot welding machine

Ultrasonic welding machine Environmentally friendly, highly cost-effective and minimal in its consumption of raw materials, ultrasonic technology is an established solution for plastic welding, packaging systems and cut’n’seal processes involving textiles and nonwovens. Our Advantages 1

  • Place of Origin: China (Mainland)
  • Brand Name: Cheersonic
  • Model Number: CS-WS-5
  • Voltage: 110V/220V
  • Power: 100-3000W
  • Frequency: 15-28KHz
  • Dimensions: 35*40*10cm,Custom Made
  • Usage: plastic/metal welding etc.
  • Condition: New
  • Horn Material: Titanium, Alloy, Iron, Steel ect
  • Port:NINGBO / SHANGHAI
  • Fob Price:US $800 - 1,500 / Set
  • Mini Order:1 Set/Sets
Ultrasonic technology high quality cutting power supply

Ultrasonic technology high quality cutting power supply

Ultrasonic cutting power supply CHEERSONIC supply standard and custom Ultrasonic Equipment Generator, include the horn types of following brands:BRANSON, DUKANE, RINCO, SONICS&MATERIALS, SONOBOND ect.Ultrasonic generator also called ultrasonic welding drive power supply, electronic box,

  • Place of Origin: Zhejiang China (Mainland)
  • Brand Name: CHEERSONIC
  • Model Number: CS-GR
  • Output Power: 100~5,000W
  • Certification: CE
  • Protect Feature: Totally Enclosed
  • AC Voltage: 110/220V
  • Type: Electrical Energy Generator
  • Port:Ningbo Shanghai
  • Fob Price:US $150 - 300 / Set
  • Mini Order:1 Set/Sets
Ultrasonic technology 28khz cutting power supply

Ultrasonic technology 28khz cutting power supply

Ultrasonic cutting power supply CHEERSONIC supply standard and custom Ultrasonic Equipment Generator, include the horn types of following brands:BRANSON, DUKANE, RINCO, SONICS&MATERIALS, SONOBOND ect.Ultrasonic generator also called ultrasonic welding drive power supply, electronic box,

  • Place of Origin: Zhejiang China (Mainland)
  • Brand Name: CHEERSONIC
  • Model Number: CS-GR
  • Type: Analog generator, Digital generator
  • Output Power: 100~5,000W
  • Certification: CE
  • Protect Feature: Totally Enclosed
  • AC Voltage: 110/220V
  • Port:Ningbo Shanghai
  • Fob Price:US $150 - 300 / Set
  • Mini Order:1 Set/Sets
Ultrasonic technology 1000w cutting power supply

Ultrasonic technology 1000w cutting power supply

Ultrasonic cutting power supply CHEERSONIC supply standard and custom Ultrasonic Equipment Generator, include the horn types of following brands:BRANSON, DUKANE, RINCO, SONICS&MATERIALS, SONOBOND ect.Ultrasonic generator also called ultrasonic welding drive power supply, electronic box,

  • Place of Origin: China (Mainland)
  • Brand Name: CHEERSONIC
  • Model Number: CS-GR
  • Type: Analog generator, Digital generator
  • Output Power: 100~5,000W
  • Certification: CE
  • Protect Feature: Totally Enclosed
  • AC Voltage: 110/220V
  • Port:Ningbo Shanghai
  • Fob Price:US $150 - 300 / Set
  • Mini Order:1 Set/Sets
high-power 20kHz cheersonic sonochemistry processing program

high-power 20kHz cheersonic sonochemistry processing program

CHEERSONIC is technologically advanced high intensity ultrasonic processor available to the researcher. Extremely capable and versatile, it can safely process a wide range of organic and inorganic materials – from microliters to liters. Typical applications include: sample preparation, dispersing

  • Classification: Other
  • Brand Name: Cheersonic
  • Model Number: CS20-S500
  • Place of Origin: Zhejiang China (Mainland)
  • Port:Ningbo or Shanghai
  • Fob Price:US $1,000 - 10,000 / Set
  • Mini Order:1 Set/Sets
high-power 20kHz cheersonic sonochemistry equipment

high-power 20kHz cheersonic sonochemistry equipment

CHEERSONIC is technologically advanced high intensity ultrasonic processor available to the researcher. Extremely capable and versatile, it can safely process a wide range of organic and inorganic materials – from microliters to liters. Typical applications include: sample preparation, dispersing

  • Classification: Other
  • Brand Name: Cheersonic
  • Model Number: CSB2
  • Place of Origin: China (Mainland)
  • Port:NINGBO SHANGHAI
  • Fob Price:US $1,000 - 10,000 / Set
  • Mini Order:1 Set/Sets