| Overview | Fujian Quanzhou Jinlang Chemical Co., Ltd. |
|---|---|
| Contactor | Ms. Candy Wong . |
| Port | XIAMEN, CHINA. |
| Minimum Order | 10 Ton/Tons. |
| Supply Ability | 800 Ton/Tons per Month. |
| Payment Terms | L/C,T/T. |
G.W.: 26.2KG
PH: 6.5~7.0
Usage: EVA, PE, PVC, rubber
Model Number: AC1000, AC3000, AC4000, AC6000
N.W.: 25KG
Ash: 0.3% max.
Appearance: Light yellow powder
Brand Name: JINLANG
Packaging: Corrugated paper caron
Moisture: 0.3% max.
Chemical component: Azodicarbonamide
Place of Origin: Fujian China (Mainland)
AC High Temperature Blowing Agent
Product Introduction:
The high-temperature foaming agent is produced after ultra-fining treatment and surface denaturing. It is widely used in the foaming of plastics such as EVA, PE, PVC and many kinds of rubber, which is suitable to hot-pressing foaming in large or small mold and PE secondary foaming.
Characteristics:
Stable foaming ratio
Large gas volume
Excellent dispersibility
Excellent mechanical performance of final products
Application specification:
The decomposing temperature of high-temperature foaming agents is over 200°C, the gas volume no less than 220ml/g (under standard temperature and pressure, called STP). Decomposition gases mainly including N2 and CO2 accompanies with a small amount of CO and NH3.
The decomposing temperature is adjustable within 150-200°C after adding an adequate amount of decomposing activator (foaming promotor), common activators including Zinc, Barium oxides and salts of Zinc and Barium, stearates and stearate salts.
This series of foaming agents is characterized by uniform particle size, stable foaming performance and excellent dispersibility, which makes it especially suitable to products making under different technological conditions.
Technical index:
Item No. | AC1000 | AC3000 | AC4000 | AC6000 | AC7000 | |
Chemical component | Azodicarbonamide | |||||
Appearance | Light yellow powder | |||||
Decomposing Temperature,°C | 203±2 | 202±2 | 202±2 | 200±2 | 200±2 | |
Gas Volume ml/g | STP | ≥220 | ≥220 | ≥220 | ≥220 | ≥220 |
Particle size (μm) | 12~14 | 8~10 | 6~8 | 4~6 | 3~5 | |
Moisture content,% | ≤0.3 | |||||
Ash,% | ≤0.3 | |||||
PH | 7.0~7.5 | |||||
This series of foaming agent is odorless and non-toxic, with good storage stability and has self-extinguishment. It won't decompose under common temperature but should be stored in a cool, dry place away from any sources of heat, spark, open flames, or direct sunlight. Never let it contact directly with acids or alkalis. Good local exhaust ventilation in mixing and handling areas is highly recommended. Be careful not to inhale its powder, make frequent skin contact or swallow it.
Each 25kg of this foaming agent is packed in an international standard corrugated paper carton with a polythene liner inside. A slight sticky to hands in using is the property of AC foaming agent, not caused by dampness and won't affect its quality.
Each batch of this foaming agent series weighs 3 Tons. While using the foaming agent of same batch, only a small quantity is needed to test for confirmation and then the whole batch can be used with certainty.
New offices (Fujian Jinlang Fine Chemical Co., Ltd.)
Packaging (The blowing agent can be packed in plastic-lined bags, cartons or fiber drum according to customers' requirements.)
Fujian Jinlang Fine Chemical Co., Ltd.
Add.: Shichun Industrial Area, Chidian Town, Jinjiang City, Fujian of China
Tel: 86 595 8513 2222
Fax: 86 595 8506 0111
| Management Certification | ISO 9001 |
|---|---|
| Contract Manufacturing | OEM Service Offered Design Service Offered Buyer Label Offered |
EVA Injection Blowing Agent Product Introduction:Being an improved AC product, this series of foaming agents is developed especially for the injection technology of EVA based on the high-temperature foaming agents, which is most suitable to the injection foaming products of EVA MD and EVA Injecti
N-2000 Environmental Foaming Agent (White Blowing Agent) Product Introduction This foaming agent is mainly used in the foaming extrusion and injection technology of PVC, TPR, PP and PS for profile materials, plates and sheets to make all kinds of low-foam plastic products, such as shutters and ph
Fujian Jinlang Fine Chemical Co., Ltd., locates in Chinese Shoes Capital-Jinjiang, which is one of the leading manufacturers of modified blowing agents for all kinds of plastics, rubber, EVA, PVC, PE, TPR, PVC+NBR, artificial leather and other plastics. Its products enjoy great popularity both at h
AC6000 High-temperature Foaming Agent Product Introduction This foaming agent is produced after ultra-fining treatment and surface denaturing. It is widely used in the foaming of plastics for EVA, PE, PVC and many kinds of rubber, and it is suitable to hot-pressing foaming in EVA large or small m
Endotherm-exothem Balanced Blowing Agent This series of foaming agents is mainly used in extruding foaming of PVC, TPR and PS for making pipes, plates, and section materials, and used in the injection molding of them to make toys and other articles. Characteristics: Self-formed nucleusiStable p
2013-2016 © dirgaga.com. ALL Rights Reserved. Privacy Policy | Contact us or Content Removal request
dirgaga.com