coking coal petroleum green coke ,coking coal,Graphite Petroleum Coke Specifications: s 0.5%max as customers required Ash 0.8% max as customers required VM 0.6%MAX as customers required FC: 98.5% Min S : 0.5 % Max Ash: 0.8% Max VM : 0.6 % Max Moisture: 0.5% Max Size: 0.5- 5 mm ...
Calcined petroleum coke By using the calcined petroleum coke in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, the calcined petroleum coke has follow properties: high absorptive character, ...
Description1)Raw material: Graphite Electrode raw materials use low sulphur and low ash CPC, coke plant pitch, HP grade graphite electrode add 30% Japan needle coke, UHP grade graphite electrode use 100% Janpan needle coke. Widely used in LF, EAF for steel making industry, Non-ferrous industry, sil
Inert alumina ball1. Product description Inert alumina ball, which is used as coverage and support materials and tower packing for catalyst in reactor, is widely used in petroleum, chemical, fertilizer, natural gas and environmental protection and so on. It has these charecteristics, high tem
R3.5-14m continuous casting machine copper mould tube Advantages: 1.High efficiency, energy saving healthy 2.Good resistance to high temperature and pressure 3.Excellent corrosion resistance 4.Good thermal performance -copper mould tube for CCM-material: Ag Cu, DHP-plating:hard chromium plating,
GOST9941-81 Seamless SS Pipe 01) Commodity: seamless stainless steel pipes02) Process method: cold drawn or cold rolling 03) Surface finish:passivation 04) Material: 12X18H10T 08X18B10T 03X18H11 08X17H12M2T 03X17H12M2 08X18H12M 05) Standards: GOST9941-8106) Size: a) OD: 1/4" to12"
Guide ShellAs the key component for growth of single crystal bar,we provide for you the best products with outstanding quality and advanced equipmentheaterthree-clack crucible
Introduction We have always manufactured the steel rolling equipment for more than 40 years and successively supplied the complete sets of wire mill with rolling speed of 50-100m/s and rod mill with rolling speed of 16-20m/s as well as 1500mm and 1700mm hot continuous rolling mill for numerous ste
foam glass insulationWe made investment, bringing in foreign newest technology, to establish high performance cellular glass production lines, with each yearly capacity of 35,000m3. The line starts from melter, melting right composition glass from sand, to control the quality from the beginning. B
Smetal foam glass insulation material Advantage of our product-Applicable for both cryogenic and high temperature.-Low thermal conductivity but high compressive strength.-No water absorption, no permeability, excellent airtight property.-Low thermal expansion coefficient and good dimensional stabil